Novamix

Ready-to-use, acrylic decorative coating with microcement finish, in paste form, with low VOC emissions and a particularly easy application. Suitable for floors, walls, ceilings and bathrooms, both indoors and outdoors.

​

​

​

​

Water based acrylic primer that creates uniform absorbency on absorbent and solid substrates without rising moisture. It is also suitable for application on cement and gypsum boards.

​

Consumption: 70-250 ml/m²

Color: White

​

High-strength, two-component microcement coating with ANTI-CRACKING EFFECT for floors, walls and ceilings. Recommended for indoor and outdoor areas and for surfaces where high strength is required, for both residential and heavy use. Suitable for wet areas such as baths and built-in showers.

​

Consumption: Depending on the application​

Two-component microcement coating with ANTI-CRACKING EFFECT suitable for floors, walls and ceilings. It has high resistance to chemical stress and is suitable for swimming pools, tanks, built-in showers and bathtubs. In wet areas, a compatible, strong, cement based waterproofing membrane such as SC ELASTIC or SC 200 PENETRATE must be applied beforehand. ​

Consumption: Depending on the application​

Microcement coating in the form of one-component brilliant white powder. It is particularly fine-grained with a smooth and slightly glossy finish. It is suitable for creating a ‘Venetian plaster’ texture on walls and ceilings, indoors and outdoors, as well as in wet areas such as bathrooms. 

​

Consumption: Approximately 1 kg/m²/mm of thickness

One-component, flexible cement-based waterproofing and concrete protection mortar. Ideal for protection of reinforced concrete in foundations and highly corrosive environment such as bridges and structures near the sea.

​

Consumption: 1,2 kg/m²/mm of thickness

Color: Light grey

​

​

Glossy, water-based epoxy varnish for the protection of microcement coatings. It is suitable for floors, walls and surfaces of heavy use such as kitchen countertops, bars, tables. It is applied in two coats crosswise undiluted by means of a roller.

​

Consumption: 100-150 ml/m² for application in 2 coats

​

Two-component water based polyurethane aliphatic varnish with rapid application. Protects different type of surfaces such as natural stone coverings, microcement coatings, concrete floors against dirt, water and oily pollutants and provides a mat finish without altering the color of the coating. ​

Consumption: 100-150 ml/m²

​

​

Two-component aliphatic polyurethane varnish with high resistance to sunlight. It is suitable for indoor and outdoor applications on natural stones and microcement coatings, providing a mat or slightly satin finish. Due to its excellent mechanical strength, it significantly improves abrasion resistance of the treated surface when applied to epoxy paints or floor coatings

Consumption: 200-250 ml/m²

Color: Transparent

​

​

Hybrid aliphatic polyurethane water-based varnish used for the protection of microcement coatings on walls or light traffic floors. It is also applied in one layer (1/1 in water) prior to the application of two layers of PLANOFINISH PU 2KS, PLANOFINISH PU 2KS MAT or PLANOFINISH PU 2KW MAT aliphatic polyurethane varnishes in order to enhance protection against colour alteration of the coating in areas with heavy use.

​

Consumption: 100-250 ml/m²

Color: White

Solvent for mixing with PLANOFINISH PU 2KS & PU 2KS MAT varnishes. It is recommended to use when these varnishes are applied on surfaces of reduced porosity, such as PLANOCOLOR PREMIUM microcement coatings. Also suitable for cleaning tools from fresh paint or resin products.

​

Consumption: Depending on the application

Color: Transparent

High performance alkali resistant fiberglass net which is used incorporated inside thin layer mortars such as waterproofing membranes in liquid form or cementitious waterproofing compounds  such as SC 200 EASY FLEX, SC ELASTIC, SC ELASTIC EASY, SC 200 PENETRATE for reinforcing edges or corners and as a guide for controlling the total layer thickness.